F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
8. Install the main control valve body.
1
Install the main control valve body.
2
Aligning the manual shift valve with the manual valve detent lever.
3
Install the nuts finger-tight.
4
Install the bolts finger-tight.
9. If previously installed, remove, then reinstall the bolt into the separator plate reinforcing plate.
1
Remove the bolt.
2
Install the bolt.
10. Install the accumulator body.
1
Install the accumulator body.
2
Install the nuts finger-tight.
3
Install the bolts finger-tight.
