F 150 Super Crew 4WD V8-5.4L Prop SOHC VIN Z (2003)
9. Cut the urethane applicator tip to specification.
10. CAUTION: If a vehicle is to be driven within 24 hours of urethane adhesive application, Urethane Adhesive Essex U-216 meeting Ford
specification WSB-M2G316-B must be used due to its one hour cure time.
Apply a bead of Urethane Adhesive Essex 400 HV or Essex U-216 meeting Ford specification WSB-M2G316-B to the pinch weld just outside the
foam dam.
11. Install the upper windshield weatherstrip.
12. CAUTION: Open the windows to prevent the windshield glass from being pushed out by air pressure if a door is closed.
Using the alignment marks, install the windshield glass.
13. Check the installation for air and water leaks through the urethane bond and add urethane adhesive where needed.