F 250 2WD HD Pickup V8-7.3L DSL Turbo VIN F (1997)
Heater Hose: Service and Repair
REMOVAL
Heater Hose Installation (Heater Hose Routing Same Without A/C)
1. Drain the coolant from the cooling system.
2. Loosen the clamps and remove the heater water hoses from the vehicle.
3. Cut a length of heater water hose from bulk stock which is the same length and diameter as that of the heater water hose that has been removed.
Bulk hose will require some modification on vehicles with E4OD automatic transmissions because the T in the hose has a factory crimp for
retention to the tee.
