F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Rear Door Exterior Handle: Service and Repair
Handle, Outside - Rear Door
Special Service Tool(s)
Removal
1. Remove the rear door trim panel.
2. Remove the rear door radio speaker (18808).
1. Remove the four radio speaker screws.
2. Disconnect the electrical connector.
3. Remove the rear door radio speaker.
3. Carefully peel off the rear door watershield.
4. Disconnect the two outside rear door handle rods from the rear door latch remote control.
5. Remove the outside rear door handle.
1. Drill out the two rivets.
2. Disconnect the rod.
3. Remove the outside rear door handle.
Installation
1. To install reverse the removal procedure.
• Use Heavy Duty Riveter to install the new rivets.
