F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
4. Remove the LH and RH windshield side garnish mouldings.
5. Remove the safety belt guide bolt.
1. Liff the safety belt guide bolt cover.
2. Remove the safety belt guide bolt.
6. If equipped, Remove the rear window latch Screws.
7. NOTE: Regular cab shown, Supercab similar.
Remove the roof side rear trim panel.
1. Remove the push pin.
2. Pry and release the three clips
3. Slide the roof side trim panel out of the four retainers and remove the roof side trim panel.
8. Remove the coat hooks.
1. Remove the two screws.
2. Remove the two coat hooks.