F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Loosening The Lug Nuts
-
Loosen the lug nuts.
CAUTION:Do not use heat to loosen a seized lug nut. Heat can damage the wheel and the wheel bearings.
1
Remove the center cap.
2
With the weight of the vehicle on the wheels,
3
loosen the lug nuts.
-
Raise and support the vehicle.
WARNING:THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN
UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE
VEHICLE DURING THESE OPERATIONS.
Remove The Wheel And Tire Assembly
-
Remove the wheel and tire assembly.
1
Remove the lug nuts.
2
Remove the wheel and tire assembly.
Brake Shoe And Linings - Inspection
-
Inspect the Brake Pads for wear or contamination. Replace the lining if worn to or past specification.
