F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
-
Install the snap ring.
1
Depress the primary piston.
2
Install the snap ring.
Master Cylinder Fluid Control Valve Torque Specification
-
Install the brake master cylinder fluid control valve.
Brake Pressure Switch Torque Specification
-
If equipped, install the brake pressure switch.
Install Brake Master Cylinder Filler Cap
-
Fill the (A) brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford
specification ESA-M6C25-A, DOT 3 and install the (B) brake master cylinder filler cap.
-
Bleed the brake master cylinder; refer to the procedure in this section.