F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
-
Pull to release the three clips and remove the lower instrument panel steering column cover.
-
Position the parking brake control release handle aside.
1
Remove the screws.
2
Position the handle aside.
-
Separate the parking brake control from the mounting bracket.
1
Disconnect the parking brake signal switch electrical connector.
2
Remove the parking brake control nuts.
3
Separate the parking brake control from the mounting bracket.
Parking Brake Cable And Conduit
-
Disconnect the (A) front parking brake cable and conduit from the (B) parking brake control.
