F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Crankshaft Gear/Sprocket: Testing and Inspection
WARNING: TO AVOID THE POSSIBILITY OF PERSONAL INJURY OR DAMAGE TO THE VEHICLE, DO NOT OPERATE THE
ENGINE WITH THE HOOD OPEN UNTIL THE FAN BLADE HAS FIRST BEEN EXAMINED FOR POSSIBLE CRACKS AND
SEPARATION.
NOTE: Specifications show the expected minimum or maximum condition. If a component fails to meet the specifications, it is necessary to replace or
refinish. If the component can be refinished, wear limits are provided as an aid to making a decision. Any component that fails to meet specifications and
cannot be refinished must be replaced.
1. Inspect the (A) chain and the (B) sprockets.
^
Replace as necessary.
