F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
3. On WEP engines, use the (A) Camshaft Positioning Tool to position the (B) camshaft.
4. On REP engines, rotate the crankshaft until both camshaft keyways are 90° from the cam cover surface. On REP and WEP engines, make sure the
copper links line up with the dots on the camshaft sprockets.
5. On REP equipped engines, install the (A) Cam Positioning Tool and the Camshaft Positioning Tool Adapters on the (B) camshaft.
6. On WEP engines, install the (A) Camshaft Holding Tool on the (B) camshaft.
