F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
2. Install the VSS.
(1) Install the VSS.
(2) Install the bolt.
(3) Connect the electrical connector.
3. Remove supports and lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
4. Reconnect the battery ground cable.
NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control
Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
