F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Remove the EGR vacuum regulator solenoid.
1
Remove the vacuum connector.
2
Disconnect the electrical connector.
3
Remove the two nuts.
4
Remove the EGR vacuum regulator solenoid.
INSTALLATION
1. Install the EGR vacuum regulator solenoid.
1
Position the EGR vacuum regulator solenoid.
2
Install the two nuts.
3
Connect the electrical connector.
4
Connect the vacuum connector.