F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Removal
REMOVAL
1. Disconnect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
2. Remove the accelerator control splash shield.
1
Remove the accelerator splash shield bolts.
2
Remove the accelerator control splash shield from the vehicle.
3. Remove the Idle Air Control (IAC) valve.
1
Disconnect the electrical connector.
2
Disconnect the throttle bypass hose.
3
Remove the bolts.
4
Remove the IAC valve.
5
Remove and discard the IAC valve gasket.
