F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Electronic Brake Control Module: Service and Repair
Rear Wheel Anti-Lock Brakes (RABS-II)
REMOVAL:
-
Remove the instrument cluster panel.
Anti-Lock Electronic Control Module Removal
-
Remove the anti-lock electronic control module.
1
Disconnect the anti-lock electronic control module electrical connector.
2
Remove the two anti-lock electronic control module bolts.
3
Remove the anti-lock electronic control module.
INSTALLATION:
Anti-Lock Electronic Control Module Torque Specifications
-
To install, reverse the removal procedure. Tighten the bolts to 2-3 Nm (17-26 inch lbs.).
