F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
2
Inspect and clean the magnetized rear brake antilock sensor pole piece.
3
Inspect the rear brake anti-lock sensor for damage; replace if necessary.
4
Lightly lubricate the rear brake anti-lock sensor 0-ring with motor oil.
RABS Sensor Clearance Specification
-
Measure the clearance between the rear brake antilock sensor pole piece and the rear brake anti-lock sensor ring.
RABS Sensor Torque Specifications
-
Install the rear brake anti-lock sensor.
1
Position the tear brake anti-lock sensor and install the rear brake anti-lock sensor bolt.
CAUTION:Do not apply force to the plastic rear brake anti-lock sensor electrical connector. The rear brake anti-lock sensor should slide into
the mounting opening.
2
Connect the rear brake anti-lock sensor electrical connector.
Front
REMOVAL:
Front Brake Anti-Lock Sensor Electrical Connector
1. Disconnect the front brake anti-lock sensor electrical connector.