F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
11. Remove and discard the valve housing gasket.
12. Remove the ball bearings.
(1) Remove the steering gear ball return guide clamp bolts.
(2) Remove the steering gear ball return guide clamp.
(3) Remove the steering gear ball retune.
(4) Rotate the piston over a container to collect the 28 ball bearings.
13. Remove the (A) input shaft valve and housing assembly from the (B) piston.
14. Remove and discard the Teflon(R) seal.
