F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
20. Remove the input shaft snap ring from the valve housing.
21. Rotate the valve housing with Bench Mounted Holding Fixture and use Input Shaft Bearing Seal Tool to remove the bearing and steering gear
sector shaft housing oil seal.
22. Remove valve housing from Bench Mounted Holding Fixture.
23. Install the steering gear housing in Bench Mounted Holding Fixture and remove the (A) steering gear sector shaft dust seal from the (B) sector
shaft seal bore.
24. Remove the spacer.
(1) Remove the snap ring.
(2) Remove the spacer.
