F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
7. Install the front disc brake rotor shield.
8. WARNING: WHEN A WHEEL IS INSTALLED, ALWAYS REMOVE ANY CORROSION, DIRT OR FOREIGN MATERIAL PRESENT ON
THE MOUNTING SURFACES OF THE WHEEL OR THE SURFACE OF THE WHEEL HUB, BRAKE DRUM OR BRAKE ROTOR THAT
CONTACTS THE WHEEL. INSTALLING WHEELS WITHOUT PROPER METAL TO METAL CONTACT AT THE WHEEL MOUNTING
SURFACES CAN CAUSE THE LUG NUTS TO LOOSEN AND THE WHEEL TO COME OFF WHILE THE VEHICLE IS IN MOTION,
CAUSING LOSS OF CONTROL.
Clean the wheel hub mounting surface.
9. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Install the tire and wheel assembly.
1. Position the tire and wheel assembly.
2. Install the lug nuts and lower the vehicle.
3. Tighten the lug nuts in sequence.
4. Install the wheel cover.
10. Inspect and adjust the front end alignment.
