F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Suspension Mode Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Turn the air suspension switch, located behind the cowl side trim panel, to the OFF position.
3. Disconnect the air suspension switch electrical connector.
4. Remove the air suspension switch bracket bolt and remove the air suspension switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
