F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
9. Install the forward clutch piston into the clutch drum.
-
Push the piston to the bottom of the drum using even pressure.
10. Position the (A) pressure plate, (B) clutch pack and the (C) piston return spring and retainer.
11. Use (A) Direct Clutch Spring Compressor T81P-70235-A and an arbor press to compress the piston return spring and install the (B) retaining ring.
12. Slowly release the press pressure and remove the forward clutch.
13. Install the clutch pack assembly.
(1) Install the pressure ring.
(2) Install the clutch pack.
(3) Install the pressure plate.
NOTE: Before assembly, soak new clutch discs in transmission fluid for 15 minutes.