F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
3. Lift and turn counterclockwise to remove intermediate clutch hub.
4. Remove the intermediate one-way clutch.
ASSEMBLY
1. Install the intermediate one-way clutch.
NOTE: Inspect the outer and inner races for scores or damaged surface areas where rollers contact the races. Inspect the rollers and springs for
excessive wear or damage. Inspect the spring and cage for bent or damaged spring retainers.
2. Install the intermediate clutch hub.
NOTE:
-
For ease of assembly, the chamfer on the intermediate clutch hub splines should face upward.
-
The clutch hub must rotate counterclockwise when installed on the reverse clutch drum.
