F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
7. Remove air hose. Release pressure and then slowly release press.
8. Rotate torque converter and tool, then reinstall into press with tool up.
9. Secure press. Apply enough force from press to seal tool into torque converter.
WARNING: ALWAYS FOLLOW PROPER SAFETY PROCEDURES WHILE USING PRESS.
10. Apply air pressure to valve on leak check tool.
NOTE: Use clean dry shop air.
11. With air pressure applied to valve, inspect for leaks at converter hub, seams and studs. A soap bubble solution may be applied around those areas
