F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
INSTALLATION
1. Apply 8 mm foam butyl (part of EOAZ- 19562-A), or equivalent meeting Ford specification WSB-M2G234-C to the rear window frame.
-
Start at the bottom middle and work around the frame.
NOTE: When applying foam butyl leave a slight overlap at the bottom to allow for drainage.
2. Install the window frame and glass.
1. Position the window frame and glass.
2. Tighten the bolts to specification.
NOTE: Loosely install all nuts before tightening.
3. Install the rear door window garnish.
4. Install the rear door window latch screws.
