F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Windshield: Service and Repair
Interior Auto Glass Cut-Out Knife Kit
Special Tool(s)
REMOVAL
1. Remove the cowl top vent panels.
2. Remove the windshield side garnish moulding.
3. Remove the inside rear view mirror.
4. Lower the front portion of the roof trim panel.
5. Remove the upper windshield weatherstrip.
6. Remove the LH and RH windshield mouldings.
7. Mark the outside of the windshield glass with a wax pencil to avoid damaging the glass stops when cutting urethane.
8. Lubricate the urethane sealant with water to aid Interior Glass Cut-Out Knife Kit when cutting the urethane sealant.
9. Use Interior Auto Glass Cut-Out Knife Kit to cut the urethane from the windshield glass.
