F 250 2WD LD Pickup V8-4.6L SOHC VIN 6 (1997)
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Raise and support the hood.
2. Disconnect the battery ground cable.
3. Disconnect the jack handle from the windshield washer reservoir.
4. Disconnect the windshield washer pump electrical connector.
5. Remove the three windshield washer reservoir screws.
6. Disconnect the windshield washer hose.
NOTE: Windshield washer fluid should be collected in a container after the windshield washer hose is disconnected.