F 250 2WD LD Pickup V8-5.4L SOHC VIN L (1997)
Timing Chain: Service and Repair
Removal
NOTE: Ford does not provide a procedure to align the timing components without the OE tools specified.
1. Remove the engine front cover.
NOTE: Do not turn the crankshaft until instructed to do so.
2. Remove the (A) crankshaft sensor ring from the (B) crankshaft.
3. Rotate crankshaft until the crankshaft keyway points toward the top of the engine (12 o'clock).
4. Install the (A) Camshaft Holding Tools on the (B) LH and RH camshafts.