ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Rotor/Disc|Page 5630 > < Hub-Mount Brake Rotor Machining Equipment|Page 5627
Page 1
background image

Brake Rotor/Disc: Specifications
Brake Rotor/Disc

Front Brakes

Front Brake Disc

Under 8500 GVW With 4 Wheel ABS

Minimum Thickness ...................................................................................................................................................................  1.091" in. ( 27.70 mm. )

4x2 With SRW and 8 Mounting Holes

Minimum Thickness ...................................................................................................................................................................  1.102" in. ( 28.00 mm. )

4x4 Under 8500 GVW

Minimum Thickness ...................................................................................................................................................................  1.181" in. ( 30.00 mm. )

Over 8500 GVW

Minimum Thickness ...................................................................................................................................................................  1.122" in. ( 28.50 mm. )

Under 8500 GVW With 7 Mounting Holes

Minimum Thickness ...................................................................................................................................................................  1.091" in. ( 27.70 mm. )

Rear Brakes

Rear Brake Disc

Minimum Thickness ..................................................................................................................................................................  0.472" in. ( 12.00 mm. ) 
Runout .............................................................................................................................................................................................................  0.0002" in.
Thickness Variation .........................................................................................................................................................................................  0.0005" in.

Brake Rotor/Disc|Page 5630 > < Hub-Mount Brake Rotor Machining Equipment|Page 5627