F 250 2WD Pickup V6-4.2L VIN 2 (1998)
3. Remove the front door scuff plate.
4. Remove the cowl side trim panel.
5. Disconnect the front parking brake cable and conduit.
1
Compress the connector to release the front parking brake cable and conduit.
2
Disconnect the front parking brake cable and conduit.
3
Remove the front parking brake cable and conduit.
6. Remove the front parking brake cable and conduit.
1
Pry the rubber seal from the front floor pan.
2
Unclip the front parking brake cable and conduit from the front parking brake cable clip.
3
Compress the retainer and release the front parking brake cable and conduit from the bracket.
4
Remove the front parking brake cable and conduit.
INSTALLATION
1. Follow the removal procedure in reverse order.
