F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Transmission Mounted Parking Brake Disassembly And Assembly
11. CAUTION: The mainshaft, parking brake drum and output flange are factory balanced and serviced as an assembly only. Match mark
and disassemble only if replacing the parking brake rear bearing or parking brake rear seal.
Match mark the output flange, parking brake drum and mainshaft for assembly reference.
12. Mount the mainshaft, parking brake drum and output flange assembly in vise gripping the output flange yoke.
13. CAUTION: To maintain factory balance, do not remove the mainshaft-to-output flange bolts from the mainshaft.
Transmission Mounted Parking Brake Disassembly And Assembly
Remove the four 11/16 mainshaft-to-output flange nuts.
14. Remove the mainshaft and parking brake drum from the output flange.