F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Electronic Brake Control Module: Service and Repair
Four Wheel Anti-Lock Brake System (4WABS)
Removal
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Disconnect the anti-lock brake control module electrical connectors.
3. Disconnect the pump motor electrical connector from the anti-lock brake control module.
4. Remove the anti-lock brake control module.
1
Remove the screws.
2
Remove the anti-lock brake control module.
Installation