F 250 2WD Pickup V6-4.2L VIN 2 (1998)
`
SPECIAL TOOLS
REMOVAL
1. Remove the A/C compressor.
2. Remove the A/C clutch hub retaining bolt.
1. Hold the A/C clutch hub with the Compressor Clutch Holding Tool.
2. Remove the bolt.
3. Remove the A/C clutch and the A/C clutch hub spacer.
1. Thread an 8 x 1.25 mm bolt into the A/C clutch hub spacer to force it from the compressor shaft.
2. Lift the A/C clutch and the A/C clutch hub spacer from the compressor shaft.
4. Remove the pulley snap ring.
5. Remove the A/C clutch pulley.