F 250 2WD Pickup V6-4.2L VIN 2 (1998)
5. Turn counterclockwise until the back of the headlamp switch knob is in the off position.
6. Turn the headlamp switch knob clockwise fully.
7. Remove the headlamp switch.
1
Pull the headlamp switch from the instrument panel.
2
Disconnect the electrical connectors and remove the headlamp switch.
INSTALLATION
1. To install reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
