F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Vehicle Speed Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the Vehicle Speed Sensor (VSS).
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the Vehicle Speed Sensor (VSS).
4. Remove the VSS drive gear.
1
Remove the retaining clip.
2
Remove the driven gear.
INSTALLATION
1. Install Vehicle Speed Sensor (VSS) drive gear.
1
Install the drive gear.
2
Install the retaining clip.