F 250 2WD Pickup V6-4.2L VIN 2 (1998)
1. Install the Syncro Positioning Tool on the camshaft synchronizer.
-
Rotate the Syncro Positioning Tool until it engages the notch in the camshaft synchronizer housing.
2. Install the camshaft synchronizer housing assembly as shown.
NOTE: Rotate crankshaft to #1 cylinder TDC on compression stroke.
3. Install the camshaft synchronizer housing assembly so the arrow on the Syncro Positioning Tool is 54 degrees from the centerline of the engine.
NOTE: During installation, the arrow on the synchronizer alignment tool will rotate clockwise as the gears engage.
