F 250 2WD Pickup V6-4.2L VIN 2 (1998)
3. Remove the passenger air bag module.
1
Remove the screws.
2
Disconnect the electrical connector.
3
Remove the passenger air bag module.
4. If the passenger air bag module is diagnosed as faulty, dispose of the air bag.
INSTALLATION
WARNING:
^
ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE
AND WHEN HANDLING AN AIR BAG.
^
CARRY A LIVE AIR BAG MODULE WITH THE AIR BAG AND DEPLOYMENT DOOR POINTED AWAY FROM YOUR BODY.
THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^
NEVER PROBE THE CONNECTORS ON THE AIR BAG MODULE. DOING SO CAN RESULT IN AIR BAG DEPLOYMENT
WHICH CAN RESULT IN PERSONAL INJURY.
NOTE: A repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and perform
the diagnostic procedure again.
1. Follow the removal procedure in reverse order.
