F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Safety Belt Bolt Bit
Special Tools
REMOVAL
1. Unlatch the 60% and 40% rear seat cushions.
2. Remove the rear seat center occupant safety belt tongue assembly.
1. Use Safety Belt Bolt Bit to remove the bolt.
2. Remove the rear seat center occupant safety belt tongue assembly by pulling the anchor up through the elastic strap on the seat back.
INSTALLATION
1. To install, reverse the removal procedure.
^
Check the restraint system for proper operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation.
Regular Cab, Passenger Side
Safety Belt Bolt Bit