F 250 2WD Pickup V6-4.2L VIN 2 (1998)
T55 "Torx Plus" Bit
Special Tools
REMOVAL
1. Remove the front safety belt guide nut.
1. Lift the cover from the bottom.
2. Remove the front safety belt guide nut.
2. Remove the upper and lower corner trim panels.
3. Remove the front safety belt retractor.
1. Use Safety Belt Bolt Bit to remove the bolt.
2. Remove the front safety belt retractor.
4. Use T55 "Torx Plus" Bit to remove the front safety belt anchor bolt.
INSTALLATION
