F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Seat Belt Buckle: Service and Repair
40/60 Split Bench, Driver Seat
Safety Belt Bolt Bit
Special Tool(s)
REMOVAL
1. Remove the driver seat safety belt buckle.
1. Disconnect the safety belt warning indicator switch electrical connector.
2. Use Safety Belt Bolt Bit to remove the bolt.
3. Remove the driver seat safety belt buckle.
NOTE: To ease removal, position the driver seat in its most rearward position and the passenger seat in its most forward position.
INSTALLATION
1. To install, reverse the removal procedure.
^
Check the restraint system for proper operation.
