F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Seat Belt Reminder Lamp: Description and Operation
The Generic Electronic Module (GEM) and Central Timer Module (CTM) control the following warnings and chimes:
^
Driver safety belt not fastened (warning lamp and repetitive chime).
The following four distinct chime rates are used to indicate warning:
^
Safety belt warning chime is one chime per second.
Safety Belt Warning Chime
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime will sound when the driver safety belt is not
fastened when the ignition switch is turned from the OFF/LOCK or ACC to the RUN or START position.
The safety belt warning chime will stop sounding when:
^
The safety belt is fastened.
^
The ignition switch is switched from the RUN or START to the OFF/LOCK or ACC position.
^
The chime has sounded for six seconds.
