F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Seat Belt Retractor: Service and Repair
60/40 Split Bench Seat and Bench Seat, Front Center Passenger
T55 "Torx Plus" Bit
Special Tool(s)
REMOVAL
1. Remove the front passenger safety belt.
1. Use T55 "Torx Plus" Bit to remove the bolt.
2. Feed the belt up through the seat cushion strap and remove the front passenger safety belt tongue assembly
INSTALLATION
1. To install, reverse the removal procedure.
^
Check the restraint system for proper operation.
NOTE: Make sure the tongue webbing is outside the seat side shield, not under the shield. The webbing could be cut if it is routed under the seat
side shield.
