F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Installation
1. NOTE: The end of the Coil spring must cover the first hole and be visible in the second hole. In stall the front coil spring into the front suspension
lower arm.
2. NOTE: The forward front suspension lower arm nut must be tightened first while the control arm is held at the curb position ride height. In stall
the front suspension lower arm
-
Position the front suspension lower arm and front coil spring.
-
In stall the bolts and nuts.
3. Install the lower ball joint.
-
Install the castellated nut.
-
Install a new cotter pin.
4. Install the front stabilizer bar link nut.