F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Band Apply Servo: Service and Repair
Overdrive Servo
Special Tools
REMOVAL
1. Remove the main control valve body.
2. Use (A) Servo Piston Remover/Replacer to compress the servo spring then remove the (B) overdrive servo retaining ring.
NOTE: If tool is not available, extreme care must be taken. Spring pressure will force overdrive servo piston assembly out of case. Case bore
damage may result from trying to pry on overdrive servo internal retaining ring.
3. Remove the (A) overdrive servo piston and the (B) overdrive servo piston return spring.
INSTALLATION
1. Install the overdrive servo piston assembly.
1
Install the overdrive servo piston return spring.
