F 250 2WD Pickup V6-4.2L VIN 2 (1998)
Clutch Pedal Assembly: Service and Repair
REMOVAL
1. Disconnect the clutch master cylinder push rod.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface wash it immediately
with water.
2. Remove the parking brake mechanism.
3. Remove the retainer ring.
4. Remove the clutch pedal from the pedal support bracket.
NOTE: When the clutch pedal shaft is removed from the bracket, the brake pedal, brake and clutch pedal bushings, and spring washer become
accessible.
INSTALLATION
