F 250 2WD Pickup V6-4.2L VIN 2 (1998)
5. Remove the driveshaft centering socket yoke.
1
Position the driveshaft centering socket yoke in the U-Joint Tool.
2
Press out a bearing cup.
3
Remove the driveshaft centering socket yoke.
6. Press out the driveshaft centering socket yoke universal joint bearing cups.
1
Position the yoke in the U-Joint Tool.
2
Press out the bearing cup.
3
Rotate the yoke.
4
Press out the remaining bearing cup.
7. Remove the four remaining snap rings.
8. Remove the centering cup spring.