F 250 2WD Pickup V6-4.2L VIN 2 (1998)
6. Remove the u-washers.
1
Push the axle shafts inboard.
2
Remove the u-washers.
CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
7. Remove the two axle shafts.
CAUTION: Do not damage the inner wheel bearing oil seal.
INSTALLATION
1. Lubricate the lip of the inner wheel bearing oil seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. Install the two axle shafts.