F 250 2WD Pickup V8-351 5.8L (1982)
Figure 8 - POSITIONING TEMPLATE TO LOWER FLANGE OF RADIUS ARM
2.
Locate the template (3B474) on the bottom flange of the radius arm. Refer to Figure 8 for a typical arm modification for the right hand radius arm.
One template per vehicle model is used to modify both the right and left hand radius arms. When modifying the right hand arm, position the
template with the printed side downward. The template locates off of one of two existing holes in the radius arm. The E100-350 template is shaped
to match the contours of the radius arm.
