F 250 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
If the cost of the sublet repair is excessive and the dealer cannot resolve the issue with the outside body shop, the Sublet Repair Cost Analysis Form,
Figure 6, should be completed by the dealer and faxed to the Customer Assistance Center for review and approval. This form should be attached to the
hard copy in the customer's service file and must be retained.
INSPECTION PROCEDURE
1.
Wash the vehicle with soap and rinse thoroughly. Make sure the vehicle is dry and at room temperature before performing the following test.
2.
Verify colorcoat loss of adhesion by applying a 2 inch wide by 15 inch long masking tape strip (3M Automotive 3233 Masking Tape # 06340) on
any panel that doesn't exhibit peeling. Do the test above and below the character line.
a.
Press the tape down firmly and pull the tape up quickly.
