F 250 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
Vehicle Speed Sensor/Transducer - Cruise Control: Testing and Inspection
1980-87 Models Exc. 1983-87 Ranger, 1984-87 Bronco II & 1986-87 Aerostar
1.
Disconnect 6 way connector from amplifier assembly, then connect an ohmmeter between dark green wire w/white stripe and black wire on 1980
E-100-350, 1981-83 F-100-350 models and Bronco, and 1984-87 F-150-350 and Bronco, or green and black wire on 1980 F-100-350 and
1981-83 E-100-350 models and 1984-87 E-150-350 at the speed sensor end. A reading of 40 ohms should be obtained. A reading of 0 ohms
indicates a shorted coil and an infinity reading indicates an open coil.
2.
Replace sensor if a correct reading has not been obtained.
