F 250 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
Lifter / Lash Adjuster: Service and Repair
V6-232, V8-255, 302, 351, 400, & 460
1.
Remove intake manifold.
2.
Remove rocker arm covers. Loosen rocker arm stud nuts or bolts and rotate rocker arms to the side.
3.
Remove pushrods in sequence so they can be installed in their original bores.
4.
Using a magnet, remove the lifters and place them in a numbered rack so they can be installed in their original bores. If lifters are stuck in their
bores, it may be necessary to use a plier-type tool to remove them.
5.
The internal parts of each lifter are matched sets. Do not intermix parts.
