F 250 2WD Pickup V8-351 5.8L VIN H 4-bbl HP (1985)
FIGURE 15
4.
Hold tool straight and strike handle until hub seal is fully seated, Figure 15.
CAUTION: Install new seal if seal is damaged during or after installation.
FIGURE 16
NOTE:
UNITIZED WHEEL SEALS ARE STANDARD ITEMS ON FULL FLOAT REAR AXLES. THE UNITIZED WHEEL SEAL COMBINES
THE FUNCTION OF A WEAR SLEEVE AND SEAL IN ONE SELF-CONTAINED UNIT WITH THE SEAL AND SLEEVE SURFACE
INSIDE. THE UNITIZED DESIGN PROVIDES MAXIMUM PROTECTION FOR THE SEALING SURFACE DURING INSTALLATION
AND OPERATION, FIGURE 16.
